Product ID:X-5854 CLEAR BASE ALKYD ENAMEL TINTED TO 23655 YELLOW
MSDS Date:03/01/1992
FSC:8010
NIIN:00-001-3353
MSDS Number: BWSRB

FARWEST PAINT MFG CO

4522 S 133 ST
TUKWILA, WA 98168
US

Emergency Phone: 206-941-1619

Info Phone: 206-244-8844

Preparer: NORMA HABEEB

Cage: 6F266

FARWEST PAINT MANUFACTURING CO

TUKWILA, WA 98168 US

Telephone: 206-244-8844

Cage: 6F266

MINERAL SPIRITS 350

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 25.24%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

306 GRAMS/LITER (LESS WATER)

RTECS: 9999999VO

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: MAY CAUSE IRRITATION,
SENSITIZATION, OR DEFATTING OF SKIN UPON PROLONGED OR REPEATED
CONTACT. INHALATION: EXCESSIVE EXPOSURE TO VAPORS OR SPRAY MISTS
CAN RESULT IN HEADACHE, DIZZINESS, NAUSEA, U NCONSCIOUSNESS.
REPEATED/PROLONGED OVEREXPOSURE WITH PERMANENT BRAIN & NERVOUS
SYSTEM DAMAGE. EYES: IRRITATION.
Medical Cond Aggravated by Exposure:NONE, WHEN USED IN ACCORDANCE WITH
SAFE HANDLING INSTRUCTIONS.

First Aid:SKIN: PROMPTLY WASH WITH SOAP & WATER. REMOVE & WASH
CONTAMINATED CLOTHING BEFORE REUSE. EYE: FLUSH W/LARGE QUANTITIES
WATER FOR 15 MINUTES. SEEK MED AID. INGESTION: DO NOT INDUCE
VOMITING, KEEP WARM, QUIET. GET MED AID. ASPIRATION OF MATERIAL
INTO LUNGS CAN CAUSE CHEM PNEUMONITIS WHICH CAN BE FATAL.
INHALATION: REMOVE TO FRESH AIR IMMED. IF RESPIRATORY SYMPTOMS
DEVELOP, GET MED AID IMMEDIATELY.

Flash Point Method:TCC
Flash Point:107F,42C
Lower Limits:0.7
Upper Limits:6.0
Extinguishing Media:FOAM,DRY CHEMICAL,WATER FOG,CO2.USE CLASS B
EXTINGUISHING AGENT.WATER NOT SUITABLE EXTINGUISHER,USEFUL TO COOL
CONTAINER
Fire Fighting Procedures:FIREFIGHTERS & THOSE EXPOSED TO
VAPOR/COMBUSTION PRODUCTS SHOULD WEAR SCBA. EVACUATE AREA OF
UNPROTECTED PERSONNEL. WEAR PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:VAPORS MAY FORM AN EXPLOSIVE MIXTURE IN
AIR & MAY BE IGNITED BY SPARKS, PILOT LIGHTS, ETC. CLOSED CONTAINER
MAY RUPTURE WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:REMOVE IGNITION SOURCES. VENT AREA. ABSORB
SPILL WITH ABSORBENT MATERIAL (SAWDUST, VERMICULITE, SAND) & PUT
INTO CLOSED CONTAINER. IF LARGE SPILL, DIKE (PREVENT FROM ENTERING
WATER SYSTEMS OR SEWERS). WEAR PROTECTIVE EQUIPMENT DURING
CLEANUP.
Neutralizing Agent:N/K DISPOSE IN ACCORDANCE WITH LOCAL, STATE,
AND FEDERAL REGULATIONS.

Handling and Storage Precautions:AVOID PROLONGED OR REPEATED INHALATION
OF HEATED VAPORS OR SPRAY MISTS. KEEP AWAY FROM HEAT OR OPEN FLAME.
THIS MATERIAL MAY CAUSE SENSITIZATION.
Other Precautions:DO NOT GET IN EYES, ON SKIN OR CLOTHING. DO NOT ALLOW
CONTAMINATED CLOTHING TO CONTACT SKIN. DO NOT WELD ON FULL OR EMPTY
CONTAINERS. KEEP CONTAINERS CLOSED WHEN NOT IN USE AND PROPERLY
LABELED. KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:A CANISTER-TYPE RESPIRATOR MUST BE WORN TO
PREVENT THE INHALATION OF VAPORS OR SPRAY MISTS WHEN THE TLV OR PEL
IS EXCEEDED.
Ventilation:GENERAL VENT REQUIRED DURING NORMAL USE. LOCAL VENT MAY BE
REQUIRED DURING CERTAIN OPERATIONS TO KEEP BELOW LIMITS.
Protective Gloves:CHEM RESISTANT NITRILE,NEOPRENE,RUBBER
Eye Protection:WEAR FACE SHIELD OR CHEMICAL GOGGLES
Other Protective Equipment:WEAR PROTECTIVE CLOTHING TO PREVENT SKIN
CONTACT. EYE WASH STATION AND SAFETY SHOWER SHOULD BE AVAILABLE.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health

Boiling Pt:B.P. Text:307 TO 387F
Vapor Pres:2.6 @ 20C
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NIL
Appearance and Odor:CLEAR OR COLOR OF TINT, MILD ODOR
Percent Volatiles by Volume:38.36

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDANTS, ACIDS, BASES, AND EPOXY HARDENERS
UNDER UNCONTROLLED CONDITIONS.
Stability Condition to Avoid:HEAT, SPARKS, AND OPEN FLAMES. IF PRODUCT
CONTAINS ALUMINUM, MOISTURE IN CLOSED CONTAINERS WILL GENERATE
HYDROGEN GAS.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YIELD CARBON
MONOXIDE AND TOXIC VAPORS.
Conditions to Avoid Polymerization:HEAT, SPARKS, AND OPEN FLAMES. IF
PRODUCT CONTAINS ALUMINUM, MOISTURE IN CLOSED CONTAINERS WILL
GENERATE HYDROGEN GAS.

Waste Disposal Methods:TREAT DISCARDED MAT'L AS HAZARDOUS WASTE BASED
ON CHARACTERISTIC OF IGNITABILITY AS DEFINED UNDER FEDERAL RCRA
REGS. DISPOSAL REQUIRES COMPLIANCE W/LABELING, PACKAGING,
RECORDKEEPING STANDARDS. GROUND EQUIP TO PREVENT SPARKS. MORE
INFO:800-424-9346.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.